
Eisco Labs Specific Gravity Metal Block(5cm) Set of 4- Alum, Brass, Copper, and Steel

Category : Industrial and Scientific
Density Cube with Hook, Aluminum (Al) - Element Stamp - 0.8 Inch (20mm) Sides - for Density Investigation, Specific Gravity & Specific Heat Activities - Eisco Labs

- Single, solid Aluminum density cube with hook and stamped with element, (Al) for easy identification
- Measures 20mm cubed. Including the hook, the cube measures 1.5" in height
- Excellent for physics classrooms. Density Cubes have a wide range of educational applications for all grade levels, including density investigation, specific heat and specific gravity exploration
- Due to the nature of raw metals, some oxidation or corrosion due to humidity and storage may occur. Simply scuff any oxidation off to make cube look brand new again
- Designed to be used in an educational setting and are not fabricated using ultra high precision machining. Expect tolerances in the +/- 5% range of any stated dimensions (although they are generally much tighter).
Category : BISS
35/50/100ML Stainless Steel Paint Density Specific Gravity Test Cup Liquid PycNameter for Paintwork Coating Density Determiner Pycnometer for Coatings Auxiliary Materials (35ml)

- 37/50/100ML Stainless Steel Paint Density Specific Gravity test Cup Liquid PycNameter for Paintwork Coating Density Determiner Pycnometer for Coatings Auxiliary Materials
- It is used to measure the mass in a unit volume of a certain liquid at a certain temperature (that is specific gravity) .
- The instrument includes a cylindrical container with a small hole for discharging excess test fluid.
- Cylindrical, large opening, easy to pour everywhere, easy to clean.
- Suitable for measuring the specific gravity of various coatings and auxiliary materials, oil and other liquids.
Category : BISS
Paint Density Specific Gravity Cup 100 cc/ml Stainless Steel QBB 100ml

- QBB-100-type specific gravity cup (cups density) as ISO standard size Capacity of 100ml (4 ℃), error ± 0.7ml. Used to determine the quality of a certain unit of liquid volume (ie, the proportion).
- The proportion is defined as the ratio of the density of a substance to the density of water at the same temperature.
- The product is made of stainless steel precision instruments for measuring the proportion of paint or similar products.
- The instrument includes a cylindrical container with a small hole for discharging excess test fluid. Each cup has a overflow on the lid so that excess liquid overflows. All excess liquid should be removed before weighing.
- Standards compliant: GB / T 21862 Determination of paint and varnish density ISO 2811
Category : BISS
Specific Gravity Bottle, 50ml - Flat Bottom with Perforated Stopper - Borosilicate Glass - Eisco Labs

Category : Industrial and Scientific
4pc Hooked Metal Cylinders Set - Brass, Aluminum, Steel & Copper - 2" x 0.5" - for Density Investigation, Specific Gravity & Specific Heat Experiments - Eisco Labs

- 4 piece specific gravity metal cylinder set. Each cylinder features a top hook. Set includes Brass, Aluminum, Steel & Copper. Cylinders measures 2" (50mm) in length and is 0.5" (12.5mm) wide and long
- Excellent for physics classrooms. Hooked Metal Cylinders have a wide range of educational applications for all grade levels, including density investigation, specific heat and specific gravity exploration
- Set includes a complete instruction manual that gives a background on density, specific gravity & specific heat and includes inquiry based student activities with capture sheets
- Due to the nature of raw metals, some oxidation or corrosion due to humidity and storage may occur. Simply scuff any oxidation off to make the item look brand new again
- Designed to be used in an educational setting and are not fabricated using ultra high precision machining. Expect tolerances in the +/- 5% range of any stated dimensions (although they are generally much tighter).
Category : BISS
Density Cube with Hook, Brass (Br) - Element Stamp - 0.8 Inch (20mm) Sides - for Density Investigation, Specific Gravity & Specific Heat Activities - Eisco Labs

- Single, solid Brass density cube with hook and stamped with element, (Br) for easy identification
- Measures 20mm cubed. Including the hook, the cube measures 1.5" in height
- Excellent for physics classrooms. Density Cubes have a wide range of educational applications for all grade levels, including density investigation, specific heat and specific gravity exploration
- Due to the nature of raw metals, some oxidation or corrosion due to humidity and storage may occur. Simply scuff any oxidation off to make cube look brand new again
- Designed to be used in an educational setting and are not fabricated using ultra high precision machining. Expect tolerances in the +/- 5% range of any stated dimensions (although they are generally much tighter).
Category : BISS
Density Cubes Set - Includes 6 Metals - Brass, Lead, Iron, Copper, Aluminum, Zinc - 0.4" (10mm) Sides - for use with Density, Specific Gravity Activities - Eisco Labs

- Set of 6 Density Cubes. Set includes Brass, Lead, Iron, Copper, Aluminum and Zinc. Includes a plastic snap top case for convenient storage
- Cubes measure 10mm (0.4") on each side
- Excellent for physics classrooms. Density Cubes have a wide range of educational applications for all grade levels, including density investigation, specific heat and specific gravity exploration
- Due to the nature of raw metals, some oxidation or corrosion due to humidity and storage may occur. Simply scuff any oxidation off to make cube look brand new again
- Designed to be used in an educational setting and are not fabricated using ultra high precision machining. Expect tolerances in the +/- 5% range of any stated dimensions (although they are generally much tighter).
Category : BISS
Equal Mass (30g) Cylinders, Set of 5 Metals, Varied Lengths and 0.5" Diameter Aluminum, Copper, Tin, Zinc, Brass - for use with Density, Specific Gravity, Specific Heat Activities - Eisco Labs

- 5 piece equal mass metal cylinder set. Set includes Zinc, Copper, Aluminum, Tin & Brass. The density of the metals in this set range from 2.7g/cmu00b3 to 8.8g/cmu00b3, giving learners a wide range of different values to study
- Excellent for physics classrooms. This set allows learners to explore the relationship between density & mass. Additionally, the cylinders can be used for specific gravity and specific heat experiments
- Set includes a complete instruction manual that gives a background on density, mass, specific gravity & specific heat and includes inquiry based student activities with capture sheets
- Due to the nature of raw metals, some oxidation or corrosion due to humidity and storage may occur. Simply scuff any oxidation off to make the item look brand new again
- Designed to be used in an educational setting and are not fabricated using ultra high precision machining. Expect tolerances in the +/- 5% range of any stated dimensions (although they are generally much tighter).
Category : Industrial and Scientific
StarNY Paint Density Specific Gravity Cup 100 cc/ml Stainless steel QBB 100ml

- QBB-100-type specific gravity cup (cups density) as ISO standard size Capacity of 100ml (4 ℃), error ± 0.7ml. Used to determine the quality of a certain unit of liquid volume (ie, the proportion).
- The proportion is defined as the ratio of the density of a substance to the density of water at the same temperature.
- The product is made of stainless steel precision instruments for measuring the proportion of paint or similar products.
- The instrument includes a cylindrical container with a small hole for discharging excess test fluid. Each cup has a overflow on the lid so that excess liquid overflows. All excess liquid should be removed before weighing.
- Standards compliant: GB / T 21862 Determination of paint and varnish density ISO 2811
Category : Tools
NEWTRY QBB-50ML Stainless Steel Paint Density Specific Gravity Cup for Various Kinds of Coatings and Auxiliary Materials, Oil and Other Liquids

- --Used to determine the quality of a certain unit of liquid volume (ie, the proportion).
- --The proportion is defined as the ratio of the density of a substance to the density of water at the same temperature.
- --The product is made of stainless steel for measuring the proportion of paint or similar products.
- --The instrument includes a cylindrical container with a small hole for discharging excess test fluid.
Category : Industrial and Scientific
6pc Equal Mass Metal Cylinders Set - Copper, Lead, Brass, Zinc, Iron & Aluminum - Includes Wooden Storage Block - for Specific Heat, Specific Gravity & Density Experimentation - Eisco Labs

- 6 piece equal mass metal cylinder set. Set includes copper, lead, brass, zinc, iron and aluminum. Each of the six metals in this set vary in length from 2" to 7.5", but have the same 100g mass, and 0.6" (16mm) diameter. Each cylinder features a drilled hole at one end for suspension
- Excellent for physics classrooms. This set allows learners to explore specific gravity & specific heat, and study density & mass
- Set includes a complete instruction manual that gives a background on density, mass, specific gravity & specific heat and includes inquiry based student activities with capture sheets
- Due to the nature of raw metals, some oxidation or corrosion due to humidity and storage may occur. Simply scuff any oxidation off to make the item look brand new again
- Designed to be used in an educational setting and are not fabricated using ultra high precision machining. Expect tolerances in the +/- 5% range of any stated dimensions (although they are generally much tighter).
Category : BISS
Density Cubes Set - Includes 6 Metals - Brass, Lead, Iron, Copper, Aluminum, Zinc - 0.8" (20mm) Sides - for use with Density, Specific Gravity Activities - Eisco Labs

- Set of 6 Density Cubes. Set includes Brass, Lead, Iron, Copper, Aluminum and Zinc. Includes a plastic snap top case for convenient storage
- Each cube features an element stamp for easy identification. Cubes measure 20mm (0.8") on each side
- Excellent for physics classrooms. Density Cubes have a wide range of educational applications for all grade levels, including density investigation, specific heat and specific gravity exploration
- Due to the nature of raw metals, some oxidation or corrosion due to humidity and storage may occur. Simply scuff any oxidation off to make cube look brand new again
- Designed to be used in an educational setting and are not fabricated using ultra high precision machining. Expect tolerances in the +/- 5% range of any stated dimensions (although they are generally much tighter).
Category : BISS
Density Cube, Aluminum (Al) with Element Stamp - 0.8 Inch (20mm) Sides - for Density Investigation, Specific Gravity & Specific Heat Activities - Eisco Labs

- Single, solid Aluminum density cube, with element stamp (Al) for easy identification
- Measures 20mm cubed
- Excellent for physics classrooms. Density Cubes have a wide range of educational applications for all grade levels, including density investigation, specific heat and specific gravity exploration
- Due to the nature of raw metals, some oxidation or corrosion due to humidity and storage may occur. Simply scuff any oxidation off to make cube look brand new again
- Designed to be used in an educational setting and are not fabricated using ultra high precision machining. Expect tolerances in the +/- 5% range of any stated dimensions (although they are generally much tighter).
Category : BISS
Density Cubes, Pack of 15 Steel Blocks, 20mm Sides - for use with Density, Specific Gravity, Specific Heat Activities - Eisco Labs

- Materials included are: Steel
- 20mm sides
- Intended for use with Density, Specific Gravity, Specific Heat experiments
- Where measurements are in both metric and imperial, the metric measurements are generally more accurate (the imperial are provided as a general reference).
- These are designed to be used in an educational setting and are not fabricated using ultra high precision machining. Expect tolerances in the +/- 5% range of any stated dimensions (although they are generally much tighter).
Category : Industrial and Scientific
Density Cube, Brass (Br) with Element Stamp - 0.8 Inch (20mm) Sides - for Density Investigation, Specific Gravity & Specific Heat Activities - Eisco Labs

- Single, solid Brass density cube, with element stamp (Br) for easy identification
- Measures 20mm cubed
- Excellent for physics classrooms. Density Cubes have a wide range of educational applications for all grade levels, including density investigation, specific heat and specific gravity exploration
- Due to the nature of raw metals, some oxidation or corrosion due to humidity and storage may occur. Simply scuff any oxidation off to make cube look brand new again
- Designed to be used in an educational setting and are not fabricated using ultra high precision machining. Expect tolerances in the +/- 5% range of any stated dimensions (although they are generally much tighter).
Category : BISS
Equal Length (1.5") Cylinder, Solid Copper (Cu) Metal with Removable Hooks, 0.4" (10mm) Diameter - for use with Density, Specific Gravity, Specific Heat Activities - Eisco Labs

Category : Industrial and Scientific
4pc Metal Cylinder Set - Aluminum, Zinc, Copper & Steel - 1.5" x 0.4" - for Density Investigation, Specific Gravity & Specific Heat Experiments - Eisco Labs

- 4 piece specific gravity metal cylinder set. Set includes Aluminum, Zinc, Copper & Steel. Each cylinder measures 1.5" (38mm) in length and is 0.4" (10mm) diameter
- Excellent for physics classrooms. Metal cylinders have a wide range of educational applications for all grade levels, including density investigation, specific heat and specific gravity exploration
- Set includes a complete instruction manual that gives a background on density, specific gravity & specific heat and includes inquiry based student activities with capture sheets
- Due to the nature of raw metals, some oxidation or corrosion due to humidity and storage may occur. Simply scuff any oxidation off to make the item look brand new again
- Designed to be used in an educational setting and are not fabricated using ultra high precision machining. Expect tolerances in the +/- 5% range of any stated dimensions (although they are generally much tighter).
Category : BISS
Density Cube, Iron (Fe) with Element Stamp - 0.8 Inch (20mm) Sides - for Density Investigation, Specific Gravity & Specific Heat Activities - Eisco Labs

- Single, solid Iron density cube, with element stamp (Fe) for easy identification
- Measures 20mm cubed
- Excellent for physics classrooms. Density Cubes have a wide range of educational applications for all grade levels, including density investigation, specific heat and specific gravity exploration
- Due to the nature of raw metals, some oxidation or corrosion due to humidity and storage may occur. Simply scuff any oxidation off to make cube look brand new again
- Designed to be used in an educational setting and are not fabricated using ultra high precision machining. Expect tolerances in the +/- 5% range of any stated dimensions (although they are generally much tighter).
Category : BISS
Vee Gee 6603-1 Specific Gravity Hydrometer, 1.000 to 1.220 Specific Gravity Range, 0.002 Subdivision, 305 mm Length, 60 Degree F Standard Temperature

- Specific Gravity Hydrometer
- 1.000-1.220 Specific Gravity Range
- 0.002 Subdivision
- 60u00b0F Standard Temperature
- 305mm Length
Category : Industrial and Scientific